2A

Design a polymer-based taper for intergrated optical circuits

Authors:
Ngô Sỹ Dũng, Nguyễn Thanh Phương, Phạm Phương Nam, Tống Quang Công, Trần Quốc Tiến
View:
0
Position:
0/0
To guide an optical signal into an integrated optical circuit, small optical paths, which have a diameter about 2 μm, must be used. Conventional fibers are larger in size - about 10μm. Therefore we need a tapered structure to connect these types of optical paths. We found that transmission efficiency of taper depending on the parameters as length, curvature on either side, upper curve, etc... In this report, we focus only on the influence of the lateral curvature on the taper transmission coefficient.
Relate

Vinh University journal of science

Tạp chí khoa học Trường Đại học Vinh

ISSN: 1859 - 2228

Governing body: Vinh University

  • Address: 182 Le Duan - Vinh City - Nghe An province
  • Phone: (+84) 238.3855.452 - Fax: (+84) 238.3855.269
  • Email: vinhuni@vinhuni.edu.vn
  • Website: https://vinhuni.edu.vn

 

License: 163/GP-BTTTT issued by the Minister of Information and Communications on May 10, 2023

Open Access License: Creative Commons CC BY NC 4.0

 

CONTACT

Editor-in-Chief: Assoc. Prof., Dr. Tran Ba Tien
Email: tientb@vinhuni.edu.vn

Deputy editor-in-chief: Dr. Phan Van Tien
Email: vantientkxd@vinhuni.edu.vn

Sub-Editor: Dr. Do Mai Trang
Email: domaitrang@vinhuni.edu.vn

Editorial assistant: Msc. Le Tuan Dung, Dr. Le Thanh Nga

  • Address: 4th Floor, Executive Building, No. 182, Le Duan street, Vinh city, Nghe An province.
  • Phone: (+84) 238-385-6700 | Hotline: (+84) 97-385-6700
  • Email: editors@vujs.vn
  • Website: https://vujs.vn

img